Blog produced by contributors on vertical gardening, health, and food!
(Register to become a contributor today)

Casters on the GT2: Supporters have great solutions!

Casters on the GT2: Supporters have great solutions!

The new Garden Tower 2 has been getting rave reviews this spring.  In February we changed the plastic formulation to eliminate the possibility of cold-temperature shipping damages from heavy impacts during transport. We've learned that the HDPE plastic formulation we switched to has too much stretch and flex to use directly with casters long-term. Essentially, the softer (but more durable) food-grade HDPE plastic will slowly warp if caster wheels are used directly under the tower's feet without the proper support for more than a day.


*CAUTION: Caster wheels cannot be left inserted into the feet of the Garden Tower 2 (beyond temporary use when moving the tower to a new location).*


Garden Tower Project recommends stationary objects under the towers, or the use of a platform with casters attached. For full-time caster-wheel use, we recommend a platform or dolly.  Many of these platforms have inboard wheels that reduce the stability of the tower. Please use them with caution.


Three supporters offered their solutions below. The first is the easiest and an out of-the-box solution requiring no skills, know how or tools. The second one--which builds on the first--is the most accessible for most folks with some time, tools and minimal DIY skills. The third is more highly engineered and for the experienced DIY’er with the proper skills and tools. A big thanks to our three supporters for their contributions!!!!


General suggestions on casters: 

  • Do not use only a spindle caster through the feet (for more than 12 hours). The base must be supported at least in part.
  • The platform needs to be a minimum 29”, inside diameter for (round) drum dollies.
  • The larger the wheel, the easier to negotiate uneven surfaces.
  • Polyolefin wheels will resist getting flat spots, and/or marring surfaces.
  • Treated (or marine grade) or painted plywood will last the longest in all weather conditions.

AGAIN: Many of these platforms have inboard wheels that will reduce the stability of the tower so please use them with caution.




#1  This first offering from Raymie Emslander is the easiest and an out of-the-box solution requiring no skills, know-how or tools.

From Raymie Emslander An 85 gallon drum dolly is the right size for the GT2 without a plywood platform. It has small openings on the sides to let the excess water out. The lip is low enough you can still get the drawer open.


Ours looks red because we gave it another coat of paint.




#2  Jeanne Warner posted this solution:

    I just ordered a 29" internal diameter, cross deck dolly from McMaster-Carr for $78 that is load rated at 900# and has 4 rotating polypropylene casters. It will cost about $90 dollars with shipping, delivered in two days. Once I add a plywood circle over the cross, this is the perfect solution to having a stable deck for your GT2. You should still be able to move it when you want to. According to my brother, a mechanical engineer, the polypropylene casters will assist in distributing the load so that the weight of the properly watered and growing GT2 will not overly burden your flooring if you are growing indoors


  My dolly is 29" and you can see by the photo that it is just big enough. I recommend flipping the dolly over onto the plywood and tracing around the inside of the rim so that your cut matches whatever imperfections exist in the used dolly. Also, I suggest using treated/marine grade plywood, so that it weathers well.



  The treated plywood will be absolutely fine for a LONG, long time—years and years—especially if it is painted with something like Rustoleum. The main danger point is not the top, however, it is the cut edges. As I mentioned in an earlier post, I am solving this by running caulk around the edge to seal it to the dolly ring. This will prevent water from getting to the edges, where it wicks in and wreaks havoc. The additional issue (with treated plywood) is that it needs to be dry when any freezing takes place, as that will expand the layers and then degrade the lamination.     

   I would strongly recommend that anyone who is using this set up outside—in other words, most everyone—paint the treated plywood deck with a weather resistant paint and not caulk around the rim like I am. Because I am using it indoors, my main goal was to prevent overflows from hitting the floor of my mud room. When working outside, I should think the main point of the plywood would be to support the GT2 and that drainage around the edge would be optimal to prevent deterioration of the plywood



#3 Duane Benson sent us this great DIY option to us:

My landlord requires any planters be movable. So I began planning on how to put wheels on my GT2 before it ever arrived. Using a barrel dolly never even occurred to me. So I proceeded to do my own dolly concept. A barrel dolly would have been easier, but would not have had the size, quality or locking ability of the wheels I have.


Looking at the feet, I felt it was designed to rest the entire foot on a solid surface, not just a caster carrying the weight. Even though on the website I saw a suggestion a caster cold be inserted, I decided a rigid dolly with platforms to support the entire foot of the tower would be the solution I was after and what it really needed. The tower would be bolted to the dolly. I wanted a large wheel diameter so I could move the tower from the back patio after the growing season, to the garage for the winter without catching on cement seams and handling a transition from grass to cement.


I ordered three high-quality, fully-locking 5 inch casters made of polyolefin, so they won’t develop a flat spot sitting in one place long term like rubber and other plastics and soft casters do. Fully locking makes the GT2 very secure when parked and braked. The fully-locking caster locks both the wheel, and swivel. I got the casters from They cost me $47.50 shipped.


I already had a scrap piece of unistrut. It was just enough. If you don't know what this stuff is, here is a link to it on Home Depots website. $16.50…/202714280


The fasteners were a little pricy ($37 from Home Depot) but after about 40 minutes with the Sawzall, I had a working rigid dolly with my GT2 securely mounted.


So my total cost of the dolly would be right around $100 if I had to buy the parts I didn't already own. I'm into it about $84.b2ap3_thumbnail_Duane-Benson-2.jpg


If you buy a barrel dolly for $65 (heaven forbid what shipping would cost) and have to buy a sheet of pressure treated 3/4" plywood, your going to be into it at least that much, or even a little more. Finding free or recycled dollies or plywood is the key to cutting cost. I am very happy with the result.


As an added benefit, I think I am going to go ahead and plant my peppers and other plants that can freeze since I can easily roll it in and out of the garage each morning/evening.


I am keeping my eyes open for a scrap piece of plastic lumber I can replace the plywood platforms with. The plastic lumber is made from recycled pop bottles and never rots. Those can reasonably be replaced with a loaded tower at a future date.


Read More Here





Continue reading
39694 Hits

Garden Tower Project Receives International Design Award for Garden Tower 2

Garden Tower Project Receives International Design Award for Garden Tower 2

We received a design award!

Garden Tower Project received international recognition from the International Design Awards held in Los Angeles, earlier this month. The newly released, Garden Tower 2 earned third place in the Sustainable Living/Environmental Preservation Category.


Garden Tower Project’s newest creation was selected for its achievements in design, creativity, usability and innovation in a competition that examined over 1,000 entries from designers from 52 countries. This annual competition recognizes, honors and promotes legendary design visionaries and uncovers emerging talents in architecture, interior, product, graphic and fashion design.

"It's been a wonderful honor to be recognized by the international community for creating something that is meant to improve people's lives" said Colin Cudmore, the inventor/founder of the Garden Tower Project.


What is the International Design Award?

A handful of designers, thinkers and entrepreneurs created the International Design Awards in 2007 as a response to the lack of recognition and celebration for smart and sustainable multidisciplinary design. The International Design Awards (IDA) exists to recognize, celebrate and promote legendary design visionaries and to uncover emerging talent in Architecture, Interior, Product, Graphic, and Fashion Design. IDA aspires to draw attention to the iconoclasm of design world wide, conceptualizing and producing great work.

What’s so special about our design?

The Garden Tower 2 helps you grow food in places that were challenging, or impossible, before—flat rooftops, concrete slabs, and ordinary decks. Fertile soils, a way to compost kitchen scraps, efficient use of water, and nutrient-dense foods are among the benefits of using the Garden Towers. 


Garden Tower 2, is a patented, space-saving planter and vermicomposter that enables gardeners to grow up to 50 plants (and maybe more) vertically and compactly inside a footprint of just 4 square feet. The new design easily rotates 360 degrees for optimal lighting and convenient watering. This means healthier plants and more growth over the long run, with less fuss for you.


b2ap3_thumbnail_CrossSection.jpgIn combining gardening with vermicomposting, the Garden Tower returns nutrients to the closed system, making it self-fertilizing. Vegetables thrive as the potting blend grows richer naturally over time. A nutrient collection drawer also allows the gardener to harvest compost “tea”, finished compost and worm castings, for easy recycling to the top of the Garden Tower to increase soil fertility. The Garden Tower can also support a much wider variety of large vegetables that cannot be grown in any other container type garden, including cabbages, broccoli, squash, zucchini, cucumber and melons. With supplemental lighting, the Garden Tower 2 can be used indoors.


When it comes to water, everyone is pleased to see how well the design is performing. Early users report water savings of 90 percent compared to traditional garden plots, because the exceedingly efficient design minimizes evaporation. This helps wherever you live, but is particularly critical in high-altitude and desert environments.


Garden Tower 2 was created to make growing fresh, organic produce accessible to everyone in the most innovative, efficient and effective way possible,” said Joel Grant, Garden Tower Development & Technology manager. “We are honored to be recognized by the IDA for our design.”


Click here to see the Garden Tower 2 on the IDA award winners’ page or view our press release.